Field-level steps and a link to the full installation guide
Installing a Mosaic Doors multi-slide door system requires precision, proper prep, and alignment to ensure smooth operation and long-term performance. Below is a simplified overview of the installation process. For full technical documentation, refer to the PDF linked at the end.
Field-Level Installation Steps (Overview)
1. Prepare the Opening
Verify rough opening dimensions match shop drawings
Ensure the opening is square, level, and plumb
Apply waterproofing or flashing as needed (especially for exterior applications)
2. Install the Track System
Position and secure the bottom track per the system layout
Use shims to level the track and maintain consistent reveal
Anchor according to structural requirements (concrete, wood, or steel substrate)
3. Install the Head and Side Jambs
Set the head track and side frames in place
Check for square at each corner before anchoring
Seal all joints with recommended construction sealant
4. Place the Panels
Insert sliding panels into the frame one at a time
Confirm rollers are aligned and seated properly on the track
Test for smooth operation during and after each panel is placed
5. Adjust Panels and Hardware
Fine-tune panel alignment using roller height adjustments
Check interlocks, stacking alignment, and clearances
Install handles, locks, and any integrated hardware
6. Final Sealing and Testing
Seal perimeter joints (especially at threshold and head)
Test full slide operation from both sides
Verify lock engagement and weatherstrip compression
Important Notes
Use two or more installers for large panel systems
Protect frames and panels from damage during handling
Follow structural anchoring requirements based on door weight and wind load
Download the Full Installation Guide (PDF)
For complete, step-by-step instructions, diagrams, and required tools, download the official installation manual:
📄 Download Multi-Slide Door Installation Guide (PDF)
Questions or Support?
If you have technical questions during installation, contact:
Tech Support: support@mosaicdoors.com
Design Help: design@mosaicdoors.com
Dealer HQ: Log in to access all installation PDFs and diagrams
Comments
0 comments
Please sign in to leave a comment.